data_core:script_tags
This is an old revision of the document!
Table of Contents
Script Tags
Script Tags provide a highly configurable way to define calculation and event raising tags.
Script tags can be written in:
- C#
- FLEE (Fast Lightweight Expression Evaluation) - more info
Script Tag Templates
A number of pre-configured script tags exist to perform the following functions:
Calculations
- Accumulator Calculator
Calculates the accumulated result of a monitored process tag for a given period (e.g. a day).
- Aggregation Calculator
Periodically calculate an aggregation of a process tag.
- Average Calculator
Periodically calculates the average value of a process tag.
- Delta Calculator
Calculates the delta between the value of two input tags.
- Delta with Offset Calculator
Calculates the delta between the value of two input tags, then applies an offset.
- Energy Based Availability Calculator
Energy-Based Availability (EBA) is the ratio of actual to expected energy production.
- Gas Velocity Calculator
Calculates gas velocity using flow rate and pressure.
- Normalized Deviation Calculation
Calculates the normalized deviation of a process value.
- Ratio Calculator
Calculates the ratio and between two input tags.
- Time Based Availability Calculator
Time-Based Availability (TBA) is an energy expression denoting the ratio of a time-period (e.g. a day) when power is available. It does not discriminate the cause of downtime (e.g. a deliberate stop for maintenance, no/low wind conditions).
- Time Based Delta Calculator
Monitors the rate of change of a process tag over a time period.
- Turbine Status
A turbine has three basic power-production states: 1. Power; 2. No Wind; 3. No Power.
- Turbulence Intensity Calculator
Turbulence Intensity (TI) is a measurement of wind speed turbulence. It is the ratio of wind speed StdDev to Mean.
- Turbulence Intensity Forecast Calculator
Turbulence Intensity Forecast (TI) is an measurement of wind speed turbulence derived from forecasted Wind and Gust Speed (rather than observed wind speed variance).
- Unit Converter
Convert process value from one unit to another.
Sensor Quality Checks
- Bad Data Detection
Data quality check that raises alert if monitored tag returns NaN or has a 'bad' status.
- Channel Deviation Detection
Checks for deviation in output from a sensor with two data channels. An alert indicates that one or both of the channels is unreliable. The method is to regularly compare Channel A and Channel B and check if difference is within acceptable instrument error tolerance. Default configuration is to check 24hr average difference 4 times per day.
- Flatline Detection
Script tag that checks for flatlining data (i.e. process tags where the tag may be updating regularly, but the sensor value is not changing).
- Frozen Signal Detection
Script tag that periodically ensures that newer values are being received for a tag.
Process Data Alerts
- Equipment Running Status Monitor
Monitors the running status of a piece of equipment and triggers and resets events when the status changes.
- Fleeting Excursion Monitor
Script tag template for monitoring sensors such as acoustic sand probes that can generate fleeting excursions.
- Hi/Lo Limit Monitor
Performs a Hi/Lo limit monitor check.
- Limit Monitor
Script tag that periodically monitors a process tag value against a limit using MIN/MAX aggregated data.
Use the FleetingExcursionMonitor template if you require a high degree of accuracy.
- Limit Monitor 1 Precondition
Limit monitor that will only trigger or reset an excursion event if a precondition tag value check is met.
- Limit Monitor 2 Precondition
Limit monitor that will only trigger or reset an excursion event if two precondition tag value checks are met.
- Limit Monitor 3 Precondition
Limit monitor that will only trigger or reset an excursion event if three precondition tag value checks are met.
- Logic Gate Alert
An alert that can be used to summarise the status of multiple alerts using an AND or OR operator.
- Time Based Delta Monitor
Monitors the rate of change of a process tag over a time period.
- Value Change Monitor
Monitors a tag and emits an event every time the value of the tag changes.
data_core/script_tags.1647527241.txt.gz · Last modified: 2022/03/17 14:27 by su